|
How do I know if my straps are single or double wrapped? If you cannot see the
rivet heads or the slots that the straps go into, it is double-wrapped [wrapped around the frame 2 times on each
end]. instructions
How do I replace my straps?
How do I know what fasteners to use?
Fasteners for straps are of two main types - plastic rivets or aluminum clips. These are further sub-divided
into various shapes and sizes. You can see the main ones we carry on the vinyl strap fasteners page.
My straps are not as wide as the standard widths you carry.
When you stretch the straps across the frame, they narrow slightly, so if your straps measure around 1-3/4" you
will need the 2" straps.
My frames have slots in them, and the straps have tabs on the ends to fit in the slots.
The "tabbed" straps are no longer available. You have 3 options:
[1] You can cut the straps yourself with a heavy pair of scissors
[2] Use " C-clips" assuming your frame is approximately 3/4" to
1" in diameter
[3] Drill a hole in the center of the slot and use rivet 30516
(single-wrap) or 30514 (double-wrap)
Can I get samples?
Minimum Order Value
Please note that our minimum order quantity for precut straps is 10 of each size. Unfortunately this is
necessary because of the high costs of machine setup and order processing. Also, be aware that your shipping price
may be higher than your total order value for small orders. Thanks for your understanding.
Shipping
Vinyl strap is heavy. One roll weighs approximately 25-30 pounds packed, depending on width, so
it can be relatively expensive to ship. We use UPS, FedEx or DHL ground services unless you request an expedited
shipment. We do not use the US Postal Service, as the shipment cannot be tracked if it goes missing. We will
calculate your shipping cost based upon the best rates available once your total order weight is known.
©Terry Potter
|